View MC10154_91961.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
Binary Counter
The MC10154 is a four-bit counter capable of divide-by-two, divide-by- four, divide-by-eight or a divide-by-sixteen function. Clock inputs trigger on the positive going edge of the clock pulse. Set and Reset inputs override the clock, allowing asynchronous "set" or "clear." Individual Set and common Reset inputs are provided, as well as complemen- tary outputs for the first and fourth bits. True outputs are available at all bits.
MC10154
PD ftoggle tpd tpd
= = = =
370 mW typ/pkg (No Load) 150 MHz (typ) 3.5 ns typ (C to Q0) 11 ns typ (C to Q3)
L SUFFIX CERAMIC PACKAGE CASE 620-10
P SUFFIX PLASTIC PACKAGE CASE 648-08
LOGIC DIAGRAM
S0 11 15 Q0 7 S1 13 Q1 6 S2 4 Q2 5 S3 2 Q3
PIN ASSIGNMENT
D S Q' Q C1 C2 Q R Q' D S Q' Q C1 R Q' D S Q' Q C1 R Q' D S Q' Q C1 Q R
VCC1 Q3 Q3 Q2
1 2 3 4 5 6 7 8
16 15 14 13 12 11 10 9
VCC2 Q0 Q0 Q1 CLOCK 1 S0 CLOCK 2 RESET
12 Clock 1 10 Clock 2
9 Reset 14 Q0 3
VCC1 = PIN 1 VCC2 = PIN 16 VEE = PIN 8
S3
Q3
S2 S1 VEE OUTPUTS
TRUTH TABLE
INPUTS R H L L L L L L L L L L L L L L L L L L L S0 L H L L L L L L L L L L L L L L L L L L S1 L H L L L L L L L L L L L L L L L L L L S2 L H L L L L L L L L L L L L L L L L L L S3 L H L L L L L L L L L L L L L L L L L L C1 X X H X * * * * * * * * * * * * * * * * C2 X X X H * * * * * * * * * * * * * * * * Q0 L H Q1 Q2 Q3 L H
L L H H No Count No Count H H L L H H L L H H L L H H L L H H H H L L L L H H H H L L L L
H L H L H L H L H L H L H L H L
H H H H H H H H L L L L L L L L VIH
* Clock transitions from VIL to VIH may be applied to C1 or C2 or VIL both for same effect.
3/93
(c) Motorola, Inc. 1996
3-57
REV 5
MC10154
ELECTRICAL CHARACTERISTICS
Test Limits Pin Pi Under Test 8 12 11 9 * 14 15 14 15 3 14 15 3 14 15 0.5 -1.060 -1.060 -1.890 -1.890 -1.080 -1.080 -1.080 -1.655 -1.655 -1.655 -0.890 -0.890 -1.675 -1.675 -30C Min Max 97 390 350 650 0.5 -0.960 -0.960 -1.850 -1.850 -0.980 -0.980 -0.980 -1.630 -1.630 -1.630 -0.810 -0.810 -1.650 -1.650 Min +25C Typ Max 88 245 220 410 0.3 -0.890 -0.890 -1.825 -1.825 -0.910 -0.910 -0.910 -1.595 -1.595 -1.595 -0.700 -0.700 -1.615 -1.615 Min +85C Max 97 245 220 410 Unit mAdc Adc
Characteristic Power Supply Drain Current Input Current
Symbol IE IinH
IinL Output Voltage Output Voltage Threshold Voltage Logic 1 Logic 0 Logic 1 VOH VOL VOHA
Adc Vdc Vdc Vdc
Threshold Voltage
Logic 0
VOLA
Vdc
Switching Times Clock Input
(50 Load) t12+15+ t12-13- t12+4- t12-3+ t15+ t15- t11-15+ t9-15+ 15 13 4 3 15 15 15 15 1.4 1.9 2.9 3.9 1.1 1.1 1.4 1.4 5.0 9.4 12.3 14.9 4.7 4.7 5.2 5.2 1.5 2.0 3.0 4.0 1.1 1.1 1.5 1.5 125 150 3.5 6.0 8.5 11.0 2.5 2.5 4.8 9.2 12.0 14.5 4.5 4.5 5.0 5.0 1.5 2.0 3.0 4.0 1.1 1.1 1.5 1.5 125 5.3 9.8 12.8 15.5 5.0 5.0 5.5 5.5
ns
Propagation Delay
Rise Time Fall Time Set Input Reset Input
(20 to 80%) (20 to 80%)
fcount 15 125 * Individually test each input applying VIL to input under test.
Counting Frequency
MHz
MOTOROLA
3-58
MECL Data DL122 -- Rev 6
MC10154
ELECTRICAL CHARACTERISTICS (continued)
TEST VOLTAGE VALUES (Volts) @ Test Temperature -30C +25C +85C Pin Under Test 8 12 11 9 * 14 15 14 15 3 14 15 3 14 15 Pulse In t12+15+ t12-13- t12+4- t12-3+ t15+ t15- t11-15+ t9-15+ 15 13 4 3 15 15 15 15 12 12 12 12 12 12 11 9 12 9 11 11 9 5 11 9 5 11 9 Pulse Out 15 13 4 3 15 15 15 15 15 VIHmax -0.890 -0.810 -0.700 VILmin -1.890 -1.850 -1.825 VIHAmin -1.205 -1.105 -1.035 VILAmax -1.500 -1.475 -1.440 VEE -5.2 -5.2 -5.2 (VCC) Gnd 1, 16 1, 16 1, 16 1, 16 1, 16 1, 16 1, 16 1, 16 1, 16 1, 16 1, 16 1, 16 1, 16 1, 16 1, 16 +2.0V 1, 16 1, 16 1, 16 1, 16 1, 16 1, 16 1, 16 1, 16 1, 16
TEST VOLTAGE APPLIED TO PINS LISTED BELOW VIHmax 9 12 11 9 * VILmin VIHAmin VILAmax VEE 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 -3.2 V 8 8 8 8 8 8 8 8 8
Characteristic Power Supply Drain Current Input Current
Symbol IE IinH
IinL Output Voltage Output Voltage Threshold Voltage Logic 1 Logic 0 Logic 1 VOH VOL VOHA
Threshold Voltage
Logic 0
VOLA
Switching Times Clock Input
(50 Load) Propagation Delay
Rise Time Fall Time Set Input Reset Input Counting Frequency
(20 to 80%) (20 to 80%)
fcount 15 * Individually test each input applying VIL to input under test.
Each MECL 10,000 series circuit has been designed to meet the dc specifications shown in the test table, after thermal equilibrium has been established. The circuit is in a test socket or mounted on a printed circuit board and transverse air flow greater than 500 linear fpm is maintained. Outputs are terminated through a 50-ohm resistor to -2.0 volts. Test procedures are shown for only one gate. The other gates are tested in the same manner.
MECL Data DL122 -- Rev 6
3-59
MOTOROLA
MC10154
OUTLINE DIMENSIONS
L SUFFIX CERAMIC DIP PACKAGE CASE 620-10 ISSUE V
9
-A-
16
-B-
1 8
C
L
NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION L TO CENTER OF LEAD WHEN FORMED PARALLEL. 4. DIMENSION F MAY NARROW TO 0.76 (0.030) WHERE THE LEAD ENTERS THE CERAMIC BODY. DIM A B C D E F G H K L M N INCHES MIN MAX 0.750 0.785 0.240 0.295 --- 0.200 0.015 0.020 0.050 BSC 0.055 0.065 0.100 BSC 0.008 0.015 0.125 0.170 0.300 BSC 0_ 15 _ 0.020 0.040 MILLIMETERS MIN MAX 19.05 19.93 6.10 7.49 --- 5.08 0.39 0.50 1.27 BSC 1.40 1.65 2.54 BSC 0.21 0.38 3.18 4.31 7.62 BSC 0_ 15 _ 0.51 1.01
-T-
SEATING PLANE
N E F D G
16 PL
K M J
16 PL
0.25 (0.010)
M
M
TB
S
0.25 (0.010)
TA
S
-A-
16 9
P SUFFIX PLASTIC DIP PACKAGE CASE 648-08 ISSUE R
B
1 8
NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION L TO CENTER OF LEADS WHEN FORMED PARALLEL. 4. DIMENSION B DOES NOT INCLUDE MOLD FLASH. 5. ROUNDED CORNERS OPTIONAL. DIM A B C D F G H J K L M S INCHES MIN MAX 0.740 0.770 0.250 0.270 0.145 0.175 0.015 0.021 0.040 0.70 0.100 BSC 0.050 BSC 0.008 0.015 0.110 0.130 0.295 0.305 0_ 10 _ 0.020 0.040 MILLIMETERS MIN MAX 18.80 19.55 6.35 6.85 3.69 4.44 0.39 0.53 1.02 1.77 2.54 BSC 1.27 BSC 0.21 0.38 2.80 3.30 7.50 7.74 0_ 10 _ 0.51 1.01
F S
C
L
-T- H G D
16 PL
SEATING PLANE
K
J TA
M
M
0.25 (0.010)
M
Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. "Typical" parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. How to reach us: USA/EUROPE/Locations Not Listed: Motorola Literature Distribution; P.O. Box 5405, Denver, Colorado 80217. 303-675-2140 or 1-800-441-2447 MfaxTM: RMFAX0@email.sps.mot.com - TOUCHTONE 602-244-6609 INTERNET: http://Design-NET.com
JAPAN: Nippon Motorola Ltd.; Tatsumi-SPD-JLDC, 6F Seibu-Butsuryu-Center, 3-14-2 Tatsumi Koto-Ku, Tokyo 135, Japan. 81-3-3521-8315 ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park, 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852-26629298
MOTOROLA 3-60
*MC10154/D*
MC10154/D MECL Data DL122 -- Rev 6

▲Up To Search▲

Price & Availability of MC10154

	To Download MC10154 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .